Find a reseller- New
expand_less
expand_more
NEW
I'm
SUPERVISION F200
200 lumen rechargeable front light
The Supervision F200 is a 200 lumen front light for bicycles, enabling you to ride with confidence in daylight or in low-light conditions. It is specially designed for cyclists looking for maximum visibility and increased safety when riding in the city or on a tour. Easy to install and remove thanks to its adjustable mounting bracket, it is IPX6 certified, water and impact resistant. Its central button makes it easy to use, with quick access to the different setting modes. This light has 4 operating modes: 2 steady and 2 flashing modes. Its long battery life means you'll always be able to see and be seen.
Available in Supervision F200/R150 #1000 set
SUPERVISION F200
Great autonomy
Up to 86 hours of operation depending on the mode chosen
Easy adjustment
Central button for easy access
Universal mounting
Removable bracket for handlebar
Waterproof
IPX6 certified
Rechargeable
Recharges via USB-C port (cable not supplied)
Characteristics
- Weight
- 137g
- Material
- Plastic
- Mounting
- Removable hanger attachment
- Dimensions
- 105 x 41 x 35 mm
- Product reference
- 1017
- Lighting type
- LED
- Battery type
- Polymer
- Battery capacity
- 3.7 V 2500mAh
- Modes/steady runtime
- 200lm (2hrs) 100lm (4hrs15)
- Modes/flash autonomy
- 200lm (18hrs) 50lm (86hrs)
- Angle visibility
- 340°
- Recharge
- Via USB-C port (cable not supplied)
- Recharge time
- 2hrs (5V 1A)
- Waterproofing
- IPX6
The advantages of this accessory
Rechargeable front light
The Supervision F200 is a 200 lumen front light for bicycles, enabling you to ride with confidence in daylight or in low-light conditions. It is specially designed for cyclists looking for maximum visibility and increased safety when riding in the city or on a tour.
Great autonomy
This light has 4 operating modes: 2 steady and 2 flashing modes. Its long battery life means you'll always be able to see and be seen. Up to 86 hours of operation depending on the mode chosen.
Easy adjustment
Easy to install and remove thanks to its adjustable mounting bracket, its central button makes it easy to use, with quick access to the different setting modes.
Waterproof
The Supervision F200 is IPX6 certified, water and impact resistant.
Our advices and commitments
Mounting instructions
downloadable assembly instructions
Directions for use
The SUPERVISION F200 has been specially designed to ensure you are always visible and can see in front of you in towns and suburban areas during the day or in low light, but also to improve your visibility during the day, whatever your activity.
* Read the manual carefully before use.
* Do not dazzle other road users by shining the light directly into their eyes.
* Make sure that the USB port plug is properly closed to ensure that the light is waterproof.
* Children must not use the device without adult supervision.
* After prolonged use, do not touch the lamp to avoid burns.
* There is overheating protection for bright light. For high brightness lighting, there is a temperature control when the lamp overheats. If the light becomes hot and the temperature of the internal components is detected at 65°C or 75°C, it switches to medium brightness mode. When the temperature drops back to 55° or 65°C, it returns to its original brightness mode. The lighting switches off automatically when the temperature of the internal components reaches 75°/85°.
*When the battery capacity falls below 20%, the lighting automatically switches to 100lm mode.
Follow our recommendations for use in our "Choosing and using your lighting" advice page.
Maintenance instructions
To preserve the life of the battery, please respect the following conditions of use:
* Fully charge the battery before using for the first time.
* Please check that your charging cable is in good condition before use.
* When charging, please use a 5V USB power adapter.
* Please charge the product at an ambient temperature between 5°C and 40°C.
* Do not charge, discharge or store the product in a hot environment as this will accelerate the ageing of the battery.
* Please keep your lighting fully charged in a cool, dry place.
* If not in use, this product should be recharged once every 3 months to avoid damaging the battery and rendering it unusable.
Engineered
Product designed by our R&D department in France
Quality commitment
The commitment to quality is one of our major concerns. If you encounter any difficulties with this product, please contact our quality department
Files to download
Complementary Products
Spare parts
NEW
NEW
NEW