Z SEALANT
search
  • Z SEALANT
expand_less expand_more

Z SEALANT

Anti-puncture Sealant

The Z Sealant was designed to prevent punctures. The latex-based-formula obstructs punctures up to 3 mm for secure riding. The product is suitable for all types of pressure, low or high.



Quantity
€8.29
place FIND A RESELLER

Contains less than 1% ammonia

Won’t damage your tires.

Easy touse

Injected into the valve stem or directly into a tubeless tire.

They approve

Characteristics

Dimensions
170 mm x 40 mm x 40 mm (ref: 9801)
213 mm x 47 mm x 47 mm (ref: 9802)
255 mm x 80 mm x 80 mm (ref: 9821)
288 mm x 195 mm x 115 mm (ref: 9831)
Product reference
9801
9802
9821
9831
Capacity
1 L (ref: 9821)
5 L (ref: 9831)
125 ml (ref: 9801)
240 ml (ref: 9802)
Compositions
Less than 1% ammonia
Container
Bottle (1L)
Flask (125ml)
Flask (240ml)
Jerrycan (5L)

How to change your wheel to tubeless?

Contains less than 1% ammonia

Won’t damage your tires.

Easy to use

Injected into the valve or directly into a tubeless tire.

To obtain the safety data sheet for this product:

Our advices and commitments

Mounting instructions

1. Unscrew the upper end of the tubeless valve and remove the core (using a valve core tool)
2. Shake the bottle containing the "Z Sealant" preventive liquid well.
3. Connect the hose to the tubeless valve.
4. Pour the quantity of product adapted to the size of your tyre (refer to the indicative table on the bottle).
5. Tighten the valve core using the tool.
6. Inflate the tyre to the desired pressure or the pressure recommended by the tyre manufacturer.
7. Rotate the wheel in several directions to distribute the product inside the tyre

Directions for use

Product life of at least 6 months with regular use in temperate conditions.

Engineered

Product designed by our R&D department in France.

Quality commitment

The commitment to quality is one of our major concerns. If you encounter any difficulties with this product, please contact our quality department.

Questions and answers

Hello, how long is the preventive usable with the bottle opened?
Depending on storage conditions, time may vary, but in all cases there will be some deposit, which will reabsorb after vigorous agitation. After one year, the product may have solidified too much to be placed in the tire. The addition of a small quantity of water, coupled with vigorous agitation, can solve this problem and restore the solution's liquid appearance. However, this manipulation alters the composition of the solution. It should therefore be reserved for emergency situations where no other product is available.