SKIN ARMOR 15 METERS ROLL

Invisible Protection for Shiny Frame

The Skin Armor roll is a transparent flexible polyurethane protective film specifically developed for frames and components with a glossy finish. It protects your bike from scratches and rubbing.

The Glue Shield technology requires no liquids, so it's quick and easy to apply.

This roll format allows you to cut patches of different shapes and lengths to suit your needs, offering customised protection for your components and your bike.

The Skin Armor is resistant to water (high-pressure washing), tearing, perforation, peeling, UV rays and temperature variations. It's the ideal solution for cyclists looking for an effective, discreet solution to preserve their bike's appearance and resale value.

Quantity

€83.29

FIND A RESELLER

SKIN ARMOR 15 METERS ROLL

High resistance

No rips. Excellent resistance to puncture and peeling.

UV resist

Does not change colour with time.

Washable

Resistant to high-pressure water jets.

Temperature fluctuations resist

From -30°C to +100°C / From -22°F to +212°F.

Glue shield technology

Quick and easy dry fitting. High adhesive strength.

They approve

^«It is a very thin film that goes unnoticed once correctly installed, making it practically invisible. Obviously, being also designed for MTB, it resists water and temperature changes._»

ESMTB.com (ES, 04/2021)

Characteristics

Material: Polyurethane
Length: 15 m
Dimensions: 162 x 150 x 62 mm
Colors: Clear
Width: 58 mm
Thickness: 250 microns
Product reference: 2604
Finish: Shiny
For: Frame and fork

Our advices and commitments

Mounting instructions

1. Wash your hands.
2. Apply on a clean bike.
3. Degrease the surface to be protected with a fast-evaporating solution (such as isopropyl alcohol), and dry with a clean cloth.
4. Measure the dimensions of the surface to be protected, then transfer them to the skin armor.
5. Cut out the shape using scissors, taking care to round off the corners.
6. Separate the Skin Armor from its protection so that only the transparent adhesive remains.
7. Locate the spot and apply the patch. The protection remains repositionable.
8. If the position suits you, rub the patch with a soft cloth to remove air and ensure perfect adhesion to the substrate.
9. Dispose of the non-adhesive protection in the selective waste bin for better recycling.

Directions for use

The Skin Armor protection can be removed cold or with heat (hairdryer).
Remove gently and gradually. If glue residue remains, clean with alcohol.
Dispose of the used protection in the selective waste bin. This product can be recycled.