SKIN ARMOR

Invisble protection kit for Shiny Frame

The Skin Armor is a transparent flexible polyurethane protective film specifically developed for frames and components with a glossy finish. It protects your bike from scratches and rubbing.

The Glue Shield technology requires no liquids, so it's quick and easy to apply.

Pre-cut kits are available in a range of sizes to cover the most exposed areas of your bike (cable routing, down tube, horizontal tube or cranks).

The Skin Armor is resistant to water (high-pressure washing), tearing, perforation, peeling, UV rays and temperature variations. It's the ideal solution for cyclists looking for an effective, discreet solution to preserve their bike's appearance and resale value.

Quantity

€7.46

FIND A RESELLER

SKIN ARMOR

High resistance

No rips. Excellent resistance to puncture and peeling.

UV resist

Does not change colour with time.

Washable

Resistant to high-pressure water jets.

Temperature fluctuations resist

From -30°C to +100°C / From -22°F to +212°F.

Glue shield technology

Quick and easy dry fitting. High adhesive strength.

They approve

^«Very effective frame protection stickers that are easy to apply and do the job well. _»

Roadcc.com (UK, 10/2019)

^«The kit is quite translucent and remains so after several months of use (...) And the whole thing is quite impact/scratch resistant._»

Vojomag.com (FR, 03/2022)

^«The Zéfal Skin Armor passes the test with flying colours, both on the road and on the bike. And even after several wet rides, the protection does not come off. _»

wielerverhaal.com (NL, 11/2022)

Characteristics

Material: Polyurethane
Colors: Clear
Thickness: 250 microns
Product reference: S (ref. 2603) / M (ref. 2600) / L (ref. 2601) / XL (ref. 2618)
Finish: Shiny
For: Gloss finish frame and parts
Dimensions Skin Armor S: 290 x 74 x 2 mm
Dimensions Skin Armor M: 395 x 139 x 3 mm
Dimensions Skin Armor L: 548 x 135 x 3 mm
Dimensions Skin Armor XL: 548 x 174 x 3 mm
Included in Skin Armor S: 1 chainstay protection 252 x 25 mm 4 patches 35 X 25 mm 2 patches 25 x 45 mm
Included in Skin Armor M: 1 down-tube protection 345 X 58 mm 1 rear base-protection 252 X 25 mm 4 patches 35 X 25 mm 4 patches 50 X 25 mm 2 patches Ø 25 mm
Included in Skin Armor L: 1 down-tube protection 500 X 58 mm 1 top-tube protection 500 X 58 mm 2 rear base-protection 252 X 25 mm 2 crank protection 105 X 25mm 4 patches 35 X 25 mm 4 patches Ø 25 mm
Included in Skin Armor XL: 2 down-tube protection 500 X 90 mm 1 top-tube protection 500 X 58 mm 2 seat stay protection 244 X 35 mm 1 rear base-protection 252 X 25 mm 3 patches 50 X 25 mm 2 patches 35 x 25 mm

The advantages of this accessory

Skin Armor S

7 patches

1 chainstay protection: 252 x 25 mm

4 patches 25 x 35 mm

2 patches 25 x 45 mm

Thickness 250 microns

Skin Armor M

12 patches

1 down tube guard 345 X 58 mm

1 rear base protector 252 X 25 mm

4 patches 35 X 25 mm

4 patches 50 X 25 mm

2 patches Ø 25 mm

Skin Armor L

14 patches

1 down-tube protection 500 X 58 mm

1 top-tube protection 500 x 58 mm

2 rear base-protection 252 X 25 mm

2 crank protection 105 x 25 mm

4 patches 35 X 25 mm

4 patches Ø 25 mm

Thickness : 250 microns

Skin Armor XL

11 Patches

2 down-tube protection 500 X 90 mm

1 top-tube protection 500 X 58 mm

2 seat stay protection 244 X 35 mm

1 rear base-protection 252 X 25 mm

3 patchs 50 X 25 mm

2 patchs 35 x 25 mm

Thickness 250 microns

Our advices and commitments

Mounting instructions

1. Wash your hands.
2. Apply on a clean bike.
3. Degrease the surface to be protected with a fast-evaporating solution (such as isopropyl alcohol), and dry with a clean cloth.
4. Separate the Skin Armor from its protection so that only the transparent adhesive remains.
5. Locate the spot and apply the patch. The protection remains repositionable.
6. If the position suits you, rub the patch with a soft cloth to remove air and ensure perfect adhesion to the substrate.
7. Dispose of the non-adhesive protection in the selective waste bin for better recycling.

Directions for use

The Skin Armor protection can be removed cold or with heat (hairdryer).
Remove gently and gradually. If glue residue remains, clean with alcohol.
Dispose of the used protection in the selective waste bin. This product can be recycled.